Discontinued – Precision Cooling and Thermal Management Products
Completely sealed from room air, high density server racks inside the Liebert XDK-W utilize closed air circulation for cooling. The server heat load is dissipated into the process cold water system through an air-to-water heat exchanger in the bottom of the rack. Redundant high-performance fans drive closed loop air circulation in the rack’s interior, while servers are supplied with cold air at the front of the rack.
Liebert XDP is a system matched pumping unit, designed to support Liebert XD System spot/zone cooling modules. The indoor pumping units circulate the refrigerant to the cooling modules at a temperature always above the actual dew point to prevent condensation. All functions, such as switching pumps (if applicable), controlling refrigerant temperature, etc., are automatic.
Liebert XDF is a modular enclosure featuring high heat density cooling, delivering the benefits of big-room support in a cost-effective data center rack solution. Optimized horizontal air circulation in the server rack cabinet cools the protected equipment, both in standard mode and in the backup ventilation mode.
Mission-Critical Systems are specifically designed to handle the heat loads generated by electronic equipment. They utilize fast-response microprocessor control systems to adjust quickly to changing conditions within the room, while providing you with complete supervision of temperature and humidity at all times. Vertiv lets you choose from several humidification methods including integral infrared and steam generation units.
Liebert XDF™ is high density cooling integrated into a secured rack enclosure, providing the benefits of big room support in a cost-effective package. Optimized horizontal air circulation cools the protected equipment, both in standard mode and in backup ventilation mode. Control and monitoring are accomplished with the cabinet-mounted Liebert iCOM control system. In addition, optional Liebert UPS, advanced power strips and remote monitoring systems are available to customize the level of support to individual equipment needs.
Engineered for cost-effective, efficient performance, Series SGH humidifiers are designed for quick installation, simple operation, easy maintenance and servicing, energy efficiency, cleanliness and reliability.
The Liebert ICS is designed for the physical needs of industrial sites, with rugged and serviceable components to ensure continuous operation. ICS also has the intelligence that microprocessor technology provides. This advanced system provides close temperature and humidity control, improving the operating conditions for your electronic process control equipment.
Liebert Deluxe System/3 precision cooling system provides precise, reliable control of room temperature, humidity and airflow for proper operation of critical electronic equipment. Redundant critical components, such as compressors, blowers and motors, contribute to system reliability.
Liebert Challenger ITR is a horizontal airflow precision cooling unit that fits within a row of equipment racks. It draws hot air in through the extended rear door and supplies chilled conditioned air through a low profile, cold aisle discharge plenum.
The Liebert CSU3000 chiller delivers constant, precisely cooled water to water-cooled mainframes, industrial and medical equipment. Multiple independent modules with automatic switchover provide 100% back-up in the unlikely event of a failure in the primary module. As a result, no single component failure will interrupt operation. The Liebert CSU 3000 chiller is available in capacities from 8.75-129.5kW (2.5-37 tons), 60Hz or 50Hz. Air cooled, water cooled, glycol cooled and Liebert Glycool configurations available.
Liebert Himod precision cooling system provides precise temperature regulation, humidity control and air filtration in a high-efficiency, space-saving, low-noise unit. It provides the temperature regulation, humidity control and air filtration required by electronic equipment in computer rooms, telecommunications sites and other high tech environments. Featuring total front access for installation and service, Liebert Himod fits easily into tight spaces.
The Liebert DataCool is an overhead cooling system designed to be installed above heat dissipating equipment. Two (2) fan trays draw hot air exhausted from the equipment through a cooling coil and discharge cool air back down to the equipment. The system consists of DataCool fan coils, Coolant Distribution Units, power and signal cabling and interconnecting piping. The DataCool fan coil can be equipped with an optional air filter. A coolant distribution unit (CDU) controls the fluid temperature for up to five (5) DataCool units, preventing the water temperature from causing coil condensation.
Liebert Challenger 3000 provides complete control of temperature, humidity and air filtration. The unit offers an extremely compact footprint, ideal for facilities where space is at a premium. All critical components are front-accessible, so the unit may be corner-installed or installed flush against other equipment.
Liebert XD refrigerant-based cooling modules deliver high-density cooling with highly flexible configurations for floor-mount, rack-mount and ceiling-mount applications.
Liebert Challenger 3000 with Liebert iCOM controls provides complete control of temperature, humidity, and air filtration for midsize data center heat management applications. Liebert iCOM controls allow Liebert Challenger 3000 systems to optimize data center thermal managment. This data center solution offers an extremely compact footprint, ideal for facilities where space is at a premium.
The DCM modular rack system provides a wide variety of features and customizable options to suit unique data center needs. It offers all the advanced features and innovative flexibility required to accommodate today’s dense and complex IT systems and network gear. The DCM rack system is ideal for users who require specific configurations, non-standard sizes, system integration and factory installed components.